Product name
CLEANTIGHT (with inner ring)
Features1
These Spiral Wound Gaskets use non-asbestos based inorganic paper instead of conventional asbestos filler, and are more economical compared to other products employing non-asbestos fillers (Graphite™ or Teflon™).
Features2
A gasket with an inner ring is used for a male-female flange. The inner ring not only reinforces the gasket but also decreases the clearance between the pipe's inner diameter and the gasket, as well as preventing accumulation of fluids and errosion of corner areas.
Features3
Please use a product with inner and outer rings if the pressure rating of the flange is Class 900 (JIS 63K) or greater, or if the nominal diameter of the flange is 650A (26B) or greater.
Features4
They have heat resistance.
Features5
Also available are products complying with nuclear power specifications.
Applicable fluids
Water, Sea water, Hot water, Steam,Crude oil, Alcohol, Animal & vegetable oil, General solvent, Weak acid, Weak alkali,Strong oxidizing acid,Air, Nitrogen gas, Inert gas,Exhaust gas,Inflammable gas,Poisonous,Oxygen,Extremely low temperature liquids,
Inappropriate fluid
High temperature strong alkali and Heat transfer oil
Application
Suited as gaskets at junctions for pipe flanges that handle high temperature & high pressure fluids used in various industries.
Standard Flange
For JIS pipe flanges＝10K、16K、20K、30K、40K、63K For JPI and ANSI pipe flanges＝Classes 150, 300, 400, 600, 900, 1500, 2500 Gaskets complying with other standards such as ASME and MSS are also available. ▼ For non-st
Non-Standard Flange
|
Gasket thickness（mm）
|
Manufacturing ranges
|
|
3.2(T)
|
10〜1500
|
|
4.5(V)
|
10〜3000
|
|
6.4(W)
|
300〜3400
|
Products with a gasket thickness of 6.4 mm can be fabricated with the outer diameter of the outer ring of up to 3,500.
The sign "( )" shows thickness classifications