Polyurethane Reinforced Graphite Sheet

A polyurethane reinforced graphite sheet material that is easy to cut on-site, available in sheets 1000mm x 1000mm or cut gaskets. The material comprises two outer layers of graphite foil with a central polyurethane core. The layers are bonded together in-house and does not delaminate during punching, storage and use.

Technical Data
· Graphite Purity 99% minimum.
· Thickness range 0.4mm to 4.0mm.
· Ultra-thin polyurethane film reinforcement. (Film Thickness 0.005 microns)
· Easily cut by traditional methods.
· Conforms readily to flange surfaces.
· Used on sight glass assemblies and metal to glass applications.
· Maximum service temperature 500°C in oxidizing conditions.
· Maximum service pressure 100 Bar.
· Compressibility 40 to 50%.
· Recovery 10 to 15%.
Good flange design parameters and correct gasket fitting procedures should be adhered to, with maximum temperatures and pressure guides not being used simultaneously.

Dimension